- Corrosion Resistant Brass Construction
- 1-1/2” swivel inlet X 1-1/2”male outlet
- Eductor rated for optimum flow at 200 PSI (14 Bar)
- Furnished with 30”(76cm) pick up tube
- Variable metering valve
- Removable metering valve
- A large, easy to read metering dial
- Ball check valve prevents back flow into foam concentrate
Operating Procedures
- Must be used with a nozzle of equivalent flow rate
- Maximum hose lay between eductor and nozzle on level ground using 1½"(3.8 cm) hose is 150 ft.(46m)
- Maximum hose lay between eductor and nozzle on level ground using 2"(5 cm) hose is 300 ft.(91m)
- Normal inlet operating pressure at eductor is 200 psi; however, the eductor can be used at lower inlet pressures with a corresponding reduction in flow rates
* Pressure loss through the Chemguard eductor is approximately 35% of the inlet pressure
Suitable
- Suitable for use with water, AFFF, AR-AFFF, Fluoroprotein and Class “A” foam concentrates
|
Part No: |
Description(lpm) |
Material |
Inlet |
Weight(kg) |
Proportioning Metering Valve |
|
CE95 |
95 GPM(360) |
Brass |
1.5” NST |
10 LBS.(4.5) |
.5%,1%,3%,6% |
|
CE95NPSH |
95 GPM(360) |
Brass |
1.5” NPSH |
10 LBS.(4.5) |
.5%,1%,3%,6% |
|
CE60 |
60 GPM(227) |
Brass |
1.5” NST |
10 LBS.(4.5) |
.5%,1%,3%,6% |
|
CE60NPSH |
60 GPM(227) |
Brass |
1.5” NPSH |
10 LBS.(4.5) |
.5%,1%,3%,6% |
|
Part No: |
Description |
|
CE95T |
Pick Up Tube |
|
MV60 |
Metering Valve for 60 GPM(227 lpm) Eductor |
|
MV95 |
Metering Valve for 95 GPM(360 lpm) Eductor |
|
PTE |
Pick Up Hose and Tube w/Clamps |
